Commercialon Pressure Sensitive Adhesive

Commercialon® Premium Adhesive for Modular Carpet and LVT

COMMERCIALON Premium Modular Tile and LVT Adhesive is a superior-performance, acrylic-latex, pressure-sensitive adhesive that is specifically formulated for installing PVC-backed carpet squares (modules) and luxury vinyl tile. It is not recommended for use with non-PVC modular backings. Because of its low odor and low VOCs, COMMERCIALON
Premium Modular Tile and LVT Adhesive is ideally suited for use in health-conscious environments where odors associated with new installation are undesirable. It has great rebond to allow simple, fast removal and replacement of modular floor coverings. It is recommended over virtually all smooth surfaces, includingnonporous substrates 

CLEAN UP
Wet adhesive may be removed with warm soapy water. Dampen white cotton toweling and blot to remove (do not rub). Dried adhesive may be removed using the same dampen and blot technique with safety solvent.

SHELF LIFE
One year from date of manufacture in unopened container. Freeze thaw stable to 10°F. This product carries the CRI Green Label Plus Approval (Carpet & Rug Institute).
This product is not photochemically reactive as defined by California Rules 102 and 443.
VOC content is below that established by California SCAQMD Rule 1168.

COVERAGE
1/16” x 1/32” x 1/32” U-notch trowel (maximum of 120 square yards per 4-gallon pail) or 3/8” nap foam or paint roller (maximum 120 square yards per 4-gallon  pail). 

PROTECT FROM FREEZING
Freeze/thaw stable up 5 cycles at 0°F (-18°C). Store at room temperature

Features and Benefits
• Pressure
• Green Label Plus Certified for Low VOC’s
• Solvent-free

Commercialon Technical Data Sheet (TDS)